<h2><a href="http://hydraulicsandhosefittings.blogspot.com/2012/01/weco-union.html">weco union </a> fittings</h2>

Weco union fittings are wing type of coupling used on heavy duty Vessel, Hoses and Machines.

They are formed in a socket weld or threaded .
They are made of stainless steel or carbon steel and varies from size to size.
The use of weco unions fittings are one of the easiest ways of connecting two hoses together, they are separated into male and female section.

The female part/section of weco union fittings has ring handle which helps to connect to the male part of the union.

Weco union fittings varies in model.

The weco union model of fig. 200 has a pressure ranging from 2000 psi.

The weco union fig 100 has a pressure range of 1000 psi, the weco union fig 602 also has a pressure range of 6000 psi, While weco union fig 1502 has a pressure range of 15,000psi and above.

Weco union fitting is the best tool you must be allow to use during pressure testing . Weco hammer union if not check during pressure testing can lead to death or serious injury to the operator or nearby worker.

Most oil drilling companies makes use of weco fitting because of its quickest connection .

Weco hammer union fittings varies in sizes.

1"weco union fittings 2"weco union fittings, 3"weco union fittings, 4"weco union fittings, 5"weco union fittings, 6"weco union fittings, 8"weco union fittings, 10"weco union fittings are commonly made of carbon steel and stainless steel. The carbon steel type withstands all forms of water,hydraulics and petroleum product. The stainless steel type are generally used for fuel and oil products , hydraulic fluids and acid chemicals. the weco hammer union sometimes leaks hydraulics if not well connected.