Butterfly Valves

 

Butterfly valves are used when space is limited. 

Unlike gate valves, butterfly valves can be used to restrict or regulate flow  in fully open and fully closed positions.

 Butterfly valves have less pressure loss than gate valves. Throttle actuators control the flow of gas or liquid by means of a disk that rotates about a diametrical axis within a tube, or  two semicircular plates mounted on a common spindle, allowing flow in only one direction. Butterfly valves are more cost-effective and lighter than gate valves in most sizes and materials, making them suitable for applications with large pipe diameters.

you can contact us for more details and purchase

PVC Dreadging hoses with flange fittings

PVC pipes

PVC pipes has excellent chemical resistance across its operating temperature range, with a broad band of operating pressures.

Pvc dreadging pipes has a high stiffness and cost effectiveness covering large proportion of plastic piping installations.

Pvc pipes are resistant to many acids, bases, salts, paraffinic hydrocarbons, halogens and alcohols.

Pvc dredging pipes available includes:

6" PVC dredging pipes with flanges
8"PVC dredging  pipes with flanges,
10" PVC dredging pipes with flanges
12" PVC dredging pipes with flanges
16" PVC dredging pipes with flanges
18" PVC dredging pipes with flanges
20" PVC dredging pipes with flanges

Python monitor

 Python Monitor comprises of

1). Seamless brass 2.5" waterway for flows up to 1,250 gpm

2). Flexible installation options
Extensive base options
Two choices in manual controls — tiller or steering wheel

3). Hydrant mounting option

4). Cast brass swivel joints

5). Bronze balls in all swivel joints

6).Stainless steel handles

7).Grease zerks for easy lubrication

8). Positive twist locks for both vertical and horizontal movement
Vertical travel of 90° above to 45° below horizontal
Full 360° horizontal travel

Available Bases includes:
A). 2.5"(64mm), 3"(76mm) or 4"(102mm) 300# ANSI Flange

B).2.5"(64mm), 3"(76mm) or 4"(102mm) 150# ANSI Flange

C). 2.5" NHT outlet

Pressure:
Friction loss 24 psi at 1,250 gpm; 18 psi at 1,000 gpm; 11 psi at 750 gpm

Weighs 45lbs. (20.5kg)
18"w x 31.5"h x 17.5"d (46cm x 80cm x 44.5cm)

Hose clamps

Hose clamps/clips are devices acting as an attachment and seal to a hose.

Hose clamps/clips are of different types, sizes, material and pressure.
But let discus firstly on the types.

TYPES OF HOSE CLAMPS/CLIPS:

The spring hose clamps, worm gear/screw band hose clamp,wire clamp, ear clamps and double bolt clamps 

THE SPRING CLAMP:
Its a narrow protrusion centerd clamp. Its made up of a spring steel and a sling protrusion on the both ends of the clamp.

Spring clamps are used by pressing together the two exposed tabs with a plier to expand the radius of the clip/clamp, before its pulled on the hose to grimp the hose to the barb.

Spring clamps are not used on a high pressure hoses but on a low or medium pressure hoses. This is because the force applied by the spring clamps are not enough to grimp high pressurehydraulic hoses . 

Spring clamps/clips are used with an automotive cooling systems, automatic engine bays and some vaccume hoses.

THE WORM GEAR CLAMP/SCREW BAND CLAMP:

These type of clamps are formed with a band and a fitted in screw thread pattern. The worm gear screw clamps are used by pulling the clamp on the hose before using a screw driver to tighten it to the hose and the barb. Its known as a worm drive type of clip. The screw band clips /clamps requires no much pressure  or force.
The hoses best for these worm gear screw clamps are garden hoses, water hoses, vaccume hoses etc.

Hydraulic hoses

Hydraulic hoses are tough and flexible hoses that consists of a cover ,a tube and reinforcements that requires proper maintenance and care. 

The cover of hydraulic hoses are made up of a tough nit-rile material that can resists oil, weathering and has the ability to retain a press and crimp fitting to its body after pressing or crimping. The tube of Hydraulic hoses is also made of neoprene material which also has almost the same chemical element with the nit-rile material. It also helps in holding firmly or tightly the hydraulic crimp fitting . The reinforcements stands as the working force of every hydraulic hoses. The reinforcement is the strength of the hose. It also determine the hydraulic pressure at which the hose works or can withstand. 

In Hydraulic hoses steel plies or wire braids acts as the reinforcement together with a nylon helix formed between the Hydraulic hose cover and the tube. Hydraulic hoses are made up of different helix wire application which determines the hydraulic pressure that it can carry when a force is applied from ahydraulic pressure pump 

Hydraulic hoses according to wire applications includes:

1)Hydraulic hose R1AT:

is a hydraulic hose that has a single helix ply between the hose cover and the tube. It is made up a hydraulic pressure ranging from 500 psi to 3000 psi depending on the size. Take for instance: 2"Hydraulic hose R1AT is always 500 psi working pressure while 1/4" Hydraulic hose R1AT has a working pressure of 3000 psi. 

2) Hydraulic hoses 100R2AT:

Its a Hydraulic hose that has a double helix wire application. The pressure ranges from 1,500 psi to 5,000 psi depending on the size of the Hydraulic hose. For example, 

2" Hydraulic hose R2AT 1500 psi 1" Hydraulic hose R2AT 2000 psi, 1/4"Hydraulic hose R2AT 5,000 psi. From the above examples, you will understand that the bigger the size of hydraulic hoses, the smaller the pressure. While the bigger the pressure the smaller the size of the hydraulic hoses. 

3)hydraulic hose 100R12:

these type of hose comprises of multiples of four wire braids inside the hose cover. Its a very high pressure hoses use for oil drilling and other rig services. The working pressure of the hoses ranges from 3000 psi to 10,000 psi depending on the size. For example: 2"Hydraulic hose 100R12 has a pressure rating of 3,000 psi while the 1/4 " has a hydraulic pressure rating of 10,000 psi. It must be fitted with a hydraulic crimp fittings to avoid pressure leakage and pull out. 

4)hydraulic hose 100R13:

is a very high pressure hydraulic hose with a six wire reinforcement made up of a strong and tough helix wire or braids. They are used as a rotary hose for oil drilling and pressure testing with the use of weco union fittings. The hydraulic pressure rating of Hydraulic hose 100R13 ranges from 5,000 psi to 30,000 psi working pressure. Its hydraulic fittings are crimp fitting to withstand the hose pressure.

Butterfly valve, Weco type.

Weco butterfly valve is a lever type of valve to control fluid inflow and outflow during when operated.

Sizes available includes:

1). 3" Weco butterfly valve,
2 ). 4" Weco butterfly valve,
3).   5" Weco butterfly valve,
5 ). 6" Weco butterfly valve,
6 ). 8" Weco butterfly valve.

For purchase and enquiry please contact u

Sandblasting pot

Sandblasting pot varies in size and in litters.

Available ones includes:

1). Clemco sandpot 20 litres,
2). Clemco sandpot 40 litres,
3). Clemco sandpot 60 litres,
4). Clemco sandpot 100 litres
5). Clemco sandpot 200 litres

For purchase order and more enquiries, please contact us.

Pvc plastic tubing hose

Pvc tubbing is a flexible Teflon rubbing used in transferring chemicals and water. 

Available sizes includes: 

1). 4mm plastic tubbing

2). 6mm plastic tubbing

3). 8mm plastic tubbing

4). 10mm plastic tubbing

5). 12mm plastic tubbing

6). 1/4" plastic tubbing

7). 5/16" plastic tubbing

8). 3/8" plastic tubbing

9). 1/2" plastic tubbing

Please for purchase order. Click the contact tab.

Alluminium camlock fitting

Aluminium Camlock fitting is a quick connect type of fitting used on hoses and pipes.

Available sizes Includes:

1). 1" female thread  type  A and D Alluminium camlocks

2 ). 2" female thread  type  A and D Alluminium camlocks

3 ). 3" female thread  type  A and A Alluminium camlocks

4). 4" female thread  type  A and D aluminium camlocks

5 ). 5" female thread  type  A and D Alluminium camlocks

6). ). 6" female thread  type  A and D Alluminium camlocks.

To make purchase, please contact us.

Pvc pipe for dredging

PVC pipes has excellent chemical resistance across its operating temperature range, with a broad band of operating pressures.

Pvc dreadging pipes has a high stiffness and cost effectiveness covering large proportion of plastic piping installations.

Pvc pipes are resistant to many acids, bases, salts, paraffinic hydrocarbons, halogens and alcohols.

Pvc dredging pipes available includes:

6" PVC dredging pipes with flanges
8"PVC dredging  pipes with flanges,
10" PVC dredging pipes with flanges
12" PVC dredging pipes with flanges
16" PVC dredging pipes with flanges
18" PVC dredging pipes with flanges
20" PVC dredging pipes with flanges

SAE hydraulic fittings

SAE standard is a general specification 37 degree flareless and flared hydraulic tube fittings, as well as the O-ring fittings and plugs

SAE fittings are manufactured to provide full flow connection in the hydraulic systems and services.

SAE stands for The Society Of Automotive Engineers. They define Jic flared and flareless fittings.

SAE hydraulic fittings are used in a very high pressure fluid power applications. Both the crimper , reusable and Adapters.

Two major SAE standard includes:

1). The SAE J514
2). The SAE MIL-f-18866.

The SAE J514 standard is the new standard replacing the old military specification ( ms16142).

Three components of of SAE JIC fittings

a). The Sleeve: it is the part of the fitting that compresses the tube fitting to the flared nuts and to the hydraulic hose

B). The fittings: the pipe fittings holding the flare nuts.

C). The flared nut.

Hydraulic Hexagonal nipples.

Hydraulic hexagonal nipples are used on both hydraulic crimper fittings and hydraulic reusable fittings

.

hexagonal nipples are of different types,pressure and size which includes:

1).

Hydraulic Npt by Npt Nipple:

Both sides is the same.

2).

Hydraulic Npt by Bsp Nipple:

it has one side Npt threading and the other side Bsp threading.

3).

Hydraulic Npt by Jic threading:

one thread has a Jic threading while the other thread is the Jic threading.

4).

Hydraulic Npt by O- ring boss:

It has a male Npt threading and also a male O-ring boss.

5).

Hydraulic Npt by metric hexagonal:

it comprise of oneside metric threading and the other Npt threadings.

6).

Hydraulic Jic by Bsp hexagol nipple.

Etc.

Medium pressure hydraulic hoses 100R1AT.

Medium pressure hydraulic hoses are hoses working under the minimum burst pressure that a one wire(100R1AT) application can withstand.

Medium pressure hoses are manufactured by Aeroquip ,Parker ,Weatherhead ,Gates and other hydraulic hose manufacturing companies.

They are also called clothbody hoses. This is because they are formed with an external textile braid as the hose cover.

The hose textile cover helps to reduce or resist heat during services. They are more preferably to use where there in an increase in the temperature of the environment where the hose is working.

Some hydraulic medium pressure hoses has no textile braid. They only have a rough cover made up of a tough neoprene material.
Though it has the same working hose pressure with the textile braid but it cannot resist heat like the textile braid cover.

The maximum working pressure is between 500 psi to 1500 psi depending on the size.
For example: A 1/4 "medium pressure hydraulic hose may have the working pressure of 1500 psi to 2,000 psi,

while the same medium pressure hose but 2" in size may have a working pressure ranging from 400 psi to 600 psi.

The pressure of hydraulic hoses increases when their a decrease in the size and decreases when there is an increase in size.

The different between the textile braided medium pressure hose or clothbody hose and a rough body 100R1AT hose Is seen in the parker , Aeroquip catalogue.

A crimper fitting can be used on medium pressure hydraulic hose. But the most commonly used fitting is the Medium pressure Reusable type.

Clothbody hoses can be crimped easily with the use of a hydraulic crimping machine and can also be attached to the hydraulic reusable fittings fitting with a hand operating reusable device.

Hydraulic male pipe fitting .

Hydraulic male pipe fittings are . hydraulic crimper fittings or hydraulic reusable fittings with a male pipe thread.

They consists of different thread specification depending on the area they are to be used.

Hydraulic male pipe fittings are made up of:

a). Brass materials: the brass type of Hydraulic male pipe fittings is produced to be used where there is salty water, they resists salty environment than the carbon steel material of hydraulic male pipe fittings.

B). Stainless steel materials: they are produce to handle any type of service.
They can resist anything and also last as long as they are properly managed. They withstands more the pressure applied on hydraulic hoses .

C). Carbon steel is used almost at all places except at a salty environment. They are electrically conductive than the brass type of hydraulic male pipe fittings.

The different thread specification of hydraulic male pipe fittings includes:

1). Hydraulic male Npt threading:
its a National pipe threading with an

Npt male pipe. They are used with female Npt threading only.

They are used almost in every hoses. Including hydraulic hoses.

2). Hydraulic male JIC fittings : Is a male pipe that has a JIC (Joint Industrial Conference )usually at 37 degree flare. They are also used on

hydraulic high pressure hoses. They are used with a female JIC threading

usually 37 degree flare.

3). Hydraulic male BSP fittings: are know as the

British standard pipe thread.

They are more adaptive to a very high pressure testing hydraulic hose.

4).Hydraulic male metric fittings: they are also one of the known hydraulic male pipe . Its also more commonly used on hydraulic hoses than others.

5).

Hydraulic male ORB fittings: the ORB thread is known as the O-RING BOSS

thread used also on hydraulic hoses. They are also special thread fittings.

Hydraulic male pipe fittings: are used on weco union , flanges, chicago fitting,hydraulic quick coupler, ball valves and some other material that can adapt to the male pipe fittings.

Hydraulic fittings are maintained just as the hydraulic hoses are maintained . They must be properly care for.

Hose king nipple or barbed nipple( hydraulic hoses and crimper)

Hose king nipples and its properties

A hose king nipple is a barbed end nipple with a threaded end used in hose connections.


The barbed end of the hose king nipple hold the nipple to the hose.
Its position is between the double bolt clamp and the hose itself.

Hose king nipples or barbed nipples do the same work with a mulconroy fitting or hydraulic crimper fittings .
The only different is that a hose crimper or mulconroy fittings has a groove at which the sleeve or its sleeve will be held firmly.
While the barbed nipple has no groove nor a sleeve.

how hose king nipple can be used

Hose king nipples can be used on a hydraulic hose that has a less 100R2AT wire application. But its more safer to be used on air and water hoses with a maximum working pressure of 300 psi.

Hose king nipples are adapted to different hose couplings

SUCH AS:

1). Its adapted to a weco union fitting that has a below pressure of weco union fig 200 .

2). It can be used with a hydraulic quick connect coupler connect with a pressure rating below 3,000 psi.

3) Hose king nipples can be adapted to a camlock fittings of any kind and type.

4). It can be adapted to a crowfoot or universal coupling.

Hose king/barbed nipple manufactures

Hose king or barbed nipples are manufactured by companies like parker hydraulic fittings, Weatherhead hydraulic hoses and Power hydraulics .

Component and few other uses of a hose barbed/king nipples

Its made up of iether brass, carbon steel or stainless steel materials.
Sometimes they are used with a hydraulic pumps with a low pressure. And sometimes can be used with a crimper machine for pressing low pressure hydraulic hoses and oil hose.

Check out more below on hydraulics and other termes:

hose Pressure

A hose pressure is known as the rate at which hydraulics and fluids are transfered to a particular place through a medium.

Hose pressure are measured in Bar ,Psi,Kpa,Mpa,and Kg/cm2.

Hose pressure 10 Bar is equall to 150 Psi

hydraulic hose pressure 1 Mpa(megapascals) is equall to 10 Bars

Hydraulic hose pressure 1 kgf/cm2 is equall to 14.22 Psi.

Hydraulic hose pressure 1 Psi is also equall to .00689 Mpa.

Hydraulic hose pressure are classified in three categories

1.) The low pressure :
low pressure is the lowest rate at which a pressure is applied or transfered from a hydraulic pressure pump to hydraulic systems.
Low pressure ranges from a pressure of 75 Psi to 300 Psi working pressure. Low pressure are applied on hoses like
Garden hoses, plastic tubing hoses, transperent hoses,oil suction and discharge hoses. Water hoses and bulk hoses.


2.) medium pressure. Medium pressure are pressure applied at a medium rates, medium pressure ranges from a pressure of 400 Psi to 1,500 psi. Medium pressure is applied on hydraulic hoses that has a one wire braid reinforcement. Termed 100R1AT.

3.)High pressure : high pressure is the highest rate at which pressure is applied. Its the maximum pressure applied to hoses and other hydraulic systems from a hydraulic pressure pump .
High pressure ranges from 1,500 Psi to more than 30,000 Psi.
High pressures are applied on hydraulic hoses and Rotary hoses.
High pressure is applied to a two wire braided hose(100R2AT), four wire braid( 100R12) and six wire braided hose( 100R13).
And all hoses that withstand a higher pressure must be grimped with a hydraulic hose crimper fittings

.

Cut off machines for hydraulic hoses

A cut -off machine is manufactured to cut into parts both the multiple wire braided and single wire hydraulic hoses and other hoses easily

.

It makes the cut part of the hose looks smooth and sharp to allow proper crimping of the hose using the required fittings .
This machine requires an expert to ensure a maximum safety and efficiency in use.

It consist of a longlasting cutting blade, A timing belt, and a high tensity 2.0 hp motor.


The cutting blades of the cut off machine is driven by the timing belt, the timing belt has a belt guard that cant be easily removed after services.


During operation , the hydraulic hose is position to held by two pins on its work plate.
The hose is then pushed into the blade by a lever, the pins will then force then force the hose away from the blade side immediately the hose is cut.

The height of this hose cut -off machine is always 21 inches,
the base is always 16 by 24 inches,
the diameter of the blade is 7 inches,
while the blade speed is 3000 RPM.


The cut off machines can cut different type of hydraulic hose no matter the hose pressure

FOR MORE INFO. About this hose cut-off machine . READ MORE ABOUT HYDRAULICS BELOW...........

Hydraulic pressure pumps

Hydraulic pressure pumps are hydraulic high pressure pumps that can supply up to 10,000 psi worth of 70,000kpa used in the construction of X-T3,X-T5 AND XT-6 hoses.

The Hydraulic pressure pumps consists of:

a).6v4850 having 115v,
b). 3s6224 having 115v with a cycle of 50/60, and
c).2p5550 having 115v comprising of 50/60 cycle.


The 6v4850 or 6v4890 of hydraulic pressure pump comprises of low rpm,2.0 horse power induction motor,automatic solenoid control valve and a switch.

Again,the Hydraulic pressure pumps 3s6224 or 8s8033 features a pump with 1-1/8 horse power motor.

While a Hydraulic pressure pump 2p5550 or 2p5500 comprises a pump of 1/2 horsepower motor

All these hydraulic pressure pumps makes use of adapters and XT-3 hoses for an assembly.

You may see more about hose pressure , crimper fitting or pumps below:

High pressure booster hoses for fire enginesh

High pressure booster 800 hoses are heavy duty hoses used under a higher pressure to transfer chemicals and water to fire engines.
High pressure booster 800 hose tubes are made of black neoprene that has the ability to resist abrasion and weathering. Its tough and flexible.

Some of the High pressure booster 800 hoses has A RED neoprene cover that also resist abrasion and weathering.
High pressure booster 800 hoses withstands the minimum burst pressure of 3200 psi.

The reinforcement of this High pressure booster 800 hoses are made up of two textile braids and sometimes with braids of steel wires.

t
They also varies in size. The size includes from 1" inside diametre to 2" inside diametre.

Weatherhead hydraulic crimping machine.

Weatherhead hydraulic hose manufacturers contributed immensely in the hydraulic ,oil and gas sector of the entire world.

They have provided one of the most efficient machine and other coll o crimper machinefor a better applications and services in both onshore and offshore.

Weatherhead hose machine includes:

Weatherhead T400 hydraulic hoses machine.

Weatherhead T420 hydraulic hose machine.


Weatherhead T440 hydraulic hose machine.


Weatherhead coll o crimp with electric hydraulic pressure pumps.


Weatherhead T400/T401 hydraulic hose machine is a type of crimper that can crimp hydraulic, powerstearling,teflon and many other hoses in a more efficient way.
It can be used with an electric pump and also has a long standing work horse.


Weatherhead hydraulic T440/T410 machines are manufactured to crimp hydraulic hose with stainless fittings .its more efficient in crimping stainless than steel fittings . They also provide a large power horse and can also be powered by electric pump.



Weatherhead T450, T460, T460,T462 are portable hydraulic crimper that can be powered with electric pump .

Check out more below:

Parker hannifin/Weatherhead hydraulic hose and fittings .

Parker hannifin and Weatherhead hydraulic hose manufacturers are one of the leading and perfoming plumbing supplier that manufactures its own hydraulic hoses and fittings at a shortest time, with the best utilisation of the proper material and and safety

.

They produces high performance engine hose fittings in steel or lightweight crimper fittings .

Material produced by Parker hannifin includes:

Air conditioning hose and hose-end fittings ,
Parker hannifin socketless hose,
Parker hydraulic adapters ,
Parker hannifin Adapter,

vice jaws,
hose protector.
Fuel block,
Fuel fittings,
Fuel plugs,
Fuel sleeves,
Assembly tubes ,
Hose cutter.



The above listed materials are not only produce by Parker only but also Weatherhead.

Weatherhead hydraulic hoses and fitting are available . Contact them today and you will have them immediatly..


Check out more of hydraulic hoses or its fittings below.....

Hydraulic hose pressure hoses.

Hydraulic hoses are application hoses used at a very high pressure during drilling and fluid transfer. They are made up of a hard propylene rubber materials ,textile braids and a strong multiple helix wire.

The rubber materials are formed to withstand external abrasion, oil, weather, chemicals and other fluid contents. Some of these hydraulic hoses has a smooth body surface while some comprises of a rough body surface, the surface body of the hoses depends on what you are applying it for.

The pressure rating of the hydraulic hoses are based on its application of wire. Ie the wire reinforcements.
The more the wire reinforcement, the higher the pressure the hose can withstand.

The textile braids enables for heat and temperature resistance in order to promote the working state of the hoses.
The helix wire determines the hose pressure. helix wires can be single or multiple,all single helix wire hoses are used under low pressure applications while multiple helix wire hoses are used under medium and high pressure applications

....

Click the below link to find more about hydraulic hoses and fittings

There are experts in hydraulic sales services, quality marine marine hydraulics. Email at obyzill@yahoo.com

weco union fittings

Weco union fittings are wing type of coupling used on heavy duty Vessel, Hoses and Machines.

They are formed in a socket weld or threaded .
They are made of stainless steel or carbon steel and varies from size to size.
The use of weco unions fittings are one of the easiest ways of connecting two hoses together, they are separated into male and female section.

The female part/section of weco union fittings has ring handle which helps to connect to the male part of the union.

Weco union fittings varies in model.

The weco union model of fig. 200 has a pressure ranging from 2000 psi.

The weco union fig 100 has a pressure range of 1000 psi, the weco union fig 602 also has a pressure range of 6000 psi, While weco union fig 1502 has a pressure range of 15,000psi and above.

Weco union fitting is the best tool you must be allow to use during pressure testing . Weco hammer union if not check during pressure testing can lead to death or serious injury to the operator or nearby worker.

Most oil drilling companies makes use of weco fitting because of its quickest connection .

Weco hammer union fittings varies in sizes.

1"weco union fittings 2"weco union fittings, 3"weco union fittings, 4"weco union fittings, 5"weco union fittings, 6"weco union fittings, 8"weco union fittings, 10"weco union fittings are commonly made of carbon steel and stainless steel. The carbon steel type withstands all forms of water,hydraulics and petroleum product. The stainless steel type are generally used for fuel and oil products , hydraulic fluids and acid chemicals. the weco hammer union sometimes leaks hydraulics if not well connected.

Hose king nipples.

Hoses are sometimes designed to carry a factory fitted nipple called MUCUNROY, but at a situation whereby the mucunroy is not available you can make use of king nipples.

The use of mulconroy is usually applied on hydraulic hoses before weco unions are threaded to it.

But on the case of a barb king nipples ,its not always safe to use it with weco union unless the barb nipple is to be used with a crimper machine to grip the hose.

Hose king nipples are fitted directly into the hose before grimping them to the hose manually(clamps)or mechanically.

The use of manual grimping of hose king nipples requires a double bolt clamp or clips but it depends on the pressure such hose can withstand.
Machanical process of using a hose king nipple or barb requires the use of a crimper machine with the use of sleeves.

Hose king nipples varies in size and they ranges from 1/4" in diametre to 14 ".

Hose king nipples has two different types of threading.


A). The smooth thread king nipples: its a type of thread that is fine in nature. Its more smoother or finer than normal npt threadings. They are usually found on water pumps with female threads.

B). Rough hose king nipples: they are the normal type of king nipple that has an Npt threading . They are universal system of threading because almost every system requires this threadings.


Hose king nipples are made of brass, alluminium, steel and stainless steel materials. But all depends of the applications.

Check out for more details about nipples and fitting around post.

Hydraulic pressure reusable fittings

hydraulic Reusable pressure couplings are high ,medium and low pressure couplings attached to a hose or hoses before operation. They are also termed a manual press or hand press because they are not done by machines.
Hydraulic reusable pressure fittings are made of brass,carbon steel and stainless steel materials.

The brass material of Hydraulic reusable pressure couplings are used on salt water area. The steel materials are used on hydraulics environment while the stainless steel are the best for any application.

The Size varies from 1/4" to 3" diametre.

hydraulic hoses foot valves.

Foot valves are suction strainer with a check valve inside.

They are used for different purposes and it depends on the the area and what passes inside.

Foot valves acts as a medium between hydraulic hoses and other fuel and oil hose during a filtering process.

The check valve of the Foot valves is made up of carbon steel, brass or stainless.
During operation the check valve opens when a suction pressure is applied and closes when the applied pressure is withdrawn.

This means that the foot valves allow and block respectivly the passage of particles into the hose.

Foot valves are in different forms:

1).The threaded foot valves:
these foot valve is the type shown on the image above.
It can have a fine thread or a normal Npt threading.
It can be used together with other couplings like using a crimper fittings ( mucunroy ) or have a camlock connection to it.
They varies from sizes to sizes. From 2" to 12" or more inside diametre.

2). The flanged Foot valves are also made of cast iron ,stainless or brass materials. The above material is also connected to the check valve inside. The only different between the two is that the former above is a threaded type while the later is a flanged type.

The flange type comprises iether by 150 lbs or 300 lbs depending on the pressure of the pressure pumps.

Foot valves are good and they does a filteration work also and not just a medium for particle transfer.

As a coupler, its related to weco union , hydraulic quick coupler and camlock fitting .

Hydraulic high pressure pumps.

hydraulic pressure pumps are pumps that can supply up to 10,000 psi worth of 70,000kpa used in the construction of X-T3,X-T5 AND XT-6 hoses.

Hydraulic pressure pumps consists of 6v4850 having 115v,
A 3s6224 having 115v with a cycle of 50/60,
And 2p5550 having 115v comprising of 50/60 cycle.

The 6v4850 or 6v4890 comprises of low rpm,2.0 horsepower induction motor,automatic solenoid control valve and a switch.


The Hydraulic pressure pumps 3s6224 or 8s8033 features a pump with 1-1/8 horse power motor.


Hydraulic pressure pumps 2p5550 or 2p5500 comprises a pump of 1/2 horsepower motor.


All these hydraulic pressure pumps uses adapter and XT-3 hoses for an assembly.

Chicago/crowfoot or universal coupling

Crowfoots/universal couplings are Hose coupling normally used on compressor machines and equipments. They are also termed universal coupling. And they are one of the world easiest detachable coupling

.

Other easy detachable hose fittings/couplings includes:

Camlock fitting ,

Weco union, Hydrant fire couplings,

Hydraulic quick coupler e.t.c

.

Crowfoots coupling are made in three different materials which includes stainless steel, brass and galvanise materials

.

The stainless steel material of crowfoots is the best material to handle general works and jobs. The stainless steel chicago or crowfoot coupling has more advantage than other material in terms of rusting, breaking e.t.c

The brass material is also good for all application especially when their is electricity conduction and salty water.

The galvanise material of crowfoots resist rust. They are the most cheapest and most commonest among the other two above.

Types of Chicago or crowfoot couplings.

1). Chicago inthread coupling: the Chicago or Crowfoot Coupling is a type with female Npt threading. They are used on the male Npt king nipples(threaded pipe) or fittings.

2). Chicago out-thread coupling: the universal or crowfoot coupling out -threading is a type with male Npt pipe thread. They are connected to a female Npt fitting or pipe.

3). Crowfoot or chicago coupling hose -end: the hose -end type of universal coupling is a type that is fitted into a hose directly it be be hydraulic hoses . They are used with a hose clamp or a hose sleeve to grimp it to the hose body manually or with a Crimping machine respectively.

Factors to consider before selecting your hydraulic hoses and other hoses.

(1)DIMENSIONS:
The dimensions includes the hose internal and external diammetre.

The internal diametre is the inside circumference of the hydraulic hose.this inside circumference determines the hose size which is measured in inches or in milimetre. The smaller the size of the hose ,the higher the pressure of the hose.
Also the bigger the size of the hose, the smaller the pressure of the hydraulic hose. The external diametre is the outside diametre of a hose. It is the body of a hydraulic hose exposed to weather or abrassion. The materials used on the external diametre are made to be tough inorder to make the hose withstand abrassion.so when you want to determine the right hose ensure that the measurement of the external diametre corresponds to the area by which the hose will pass through and the ability to withstand external heat and conditions. The diametre of every hydraulic hose is very essential most especially in the area where enough pressure are used.

2).LENGTH :
The area where the selected hydraulic hoses are to be used must be measured and crimped safely.

crimping involves the use of manual or electric device or machine to fit a hose.
Inorder to avoid joining two hoses together, an accurate measurement must be taken. Machines or pumps works very well when the hydraulic hose is at a straight length without any seam. Most hoses are measured in feets ,yards or in metres. In order to avoid any mistake,get your standard tape and study the accurate measurement.
A coil of hydraulic hoses normally ranges from 20 metres to 100metres length depending on the sizes.

3). MATERIALS TO BE CONVEYED:
material that are transfered from the hydraulic hoses must be clear to you whether they has any effect on the hose

. All hydraulic hoses are designed to convey hydraulics only and while oil hoses are used to transfer oil and diesel.
Make sure that the hose material are made of good chemical compositions. Oil and hydraulic hoses are made of N B R(Nitrile butadiene tube) which has the ability to resist oil.
Both the tube and the cover can be made of the same chemical composition. Again,if you are using oxygen or gas ,ensure also that the hose you are using is comprises F P M(Florocarbon rubber materials. Then if your using the hose for fire fighting make sure its rubber composition is made of CHLOROPRENE OR ETHYLENE OXIDE. When the right hose is used for a specified use on hydrants it make it durable and also curbs environmental pollution.

4).TEMPERATURE : This is one of the major factor to consider.You must know the climate condition of where you are applying the hydraulic hose.

Is the temperature too high or too low ,can the hoses you selected adapt to the heat, or the material that are being coveyed be affected by the temperature ? Normally, every hoses that works under a higher temperature must has textile braided on the hose acting as a cover against heat. These external braided material covers both the hose tube itself and the liquid conveyed. You should also know whether you can make use of stainless iron coated plies .both the textile and the iron works well but the iron is very essential in transfering bitumen. Hose materials that are made of Epdm combination can resist heat but incase of a very high steam or exhause its preferable to use the stainless iron coated hose.

Mikalor double bolt clamps

Double bolt clamps are clamps which is used as an attachments to Hoses. They holds Hose to a barb or nipple

.

Double bolt clamps are mostly used on low pressure Hoses ranging from 50psi to 300psi. It is not proper to use a hose clamps on high pressure hydraulic hoses , instead make use of a crimper fittings on high pressure hoses and a clamp on low pressure hoses

It could be made up of galvanise steel, brass and stainless materials depending on the surface or area they are applied.

Mikalor company has ways of manufacturing quality hose clips/clamps.
, they are listed among the world wide leaders in hose clamps iso TS16949.
. Mikalor double bolt clamps has different sizes .

Hose clamps ranges from 1/2 inch to over 20 inch diameter.

Please check out more about clamps below.

Parker hannifin hydraulic steel fittings

Parker hannifin hydraulics manufactures hydraulic reusable steel fitting. The Parker hannifin hydraulics reusable steel fittings are designed to fit in hydraulic hoses with wire reinforcement such as 100RIAT(contains a single braided wire).

The hydraulic hose for reusable steel fittings are made up of a clothbody medium pressure hoses.

Parker hannifin hydraulics reusable steel fittings ranges from 3/16 " to 4 " just as in



Weatherhead reusable and crimp fittings


Before making use of any Parker hannifin hydraulics reusable steel fittings, you must ensure the outside diameter of the hose and also take the measurement of the reusable pipe end that will enter the hose. Parker hannifin reusable steel fittings can be used in place of crimper fittings. But you must ensure the pressure of the hose to determine the type of Parker hannifin hydraulics crimp fitting sleeves. To know when to use a four wire sleeve or two wire sleeve.



parker hydraulics reusable steel fittings are known from their dash sizes. For example: the dash 4( -4)=1/4" the dash 8(-8)=3/8".


Check out more about hydraulic hoses and fittings below:

Crimper fitting.

Crimp Fittings are pressure fittings attached to a hydraulic and industrial hoses by the use of a hydraulic crimping machine.
It can be straight mould or stem and sleeve.

Crimper Fittings are of different sizes, diametre,pressure application and thread formation.

It has different model depending on the use or direction the hydralics.

Crimper Fitting straight mould is used at a direct direction. It require no shift.

Crimp Fittings also has 90 degree bends. It bends when the hydraulic hoses cant curve at the required direction.
Crimp Fittings 90 degree bend is doing almost the same job with the 90 degree. Only that the two can never be applied where each other is applied.

Crimp Fittings can be made of brass,steel or stainless. Depending the area of application.

transperent /garden hoses(hydraulic and industrial)

Transperent /Garden hoses are hoses designed to handle abrassion, corrosion ,wide range of acids , other chemicals and water services.


Transperent hoses are made up of polyethelene tube and natural gum rubber . They are used for both suction and discharge services. The suction trasperent hoses recieves oil,diesel,hydraulics,chemicals and water . They contain a helix wire designed spirally in the hose as reinforcement.


The discharge Transperent hoses transfers oil, diesel,hydraulics,acids,water and other chemicals.They contain no helix wire but has a textile braid material inside.

The Transperent or Garden hoses has a normal working pressure varies from10bar-20bar and the pressure is not up to the pressure of hydraulic hoses . Its must not exceed the min. Burst pressure of 40bar.

Most hoses that are used for chemicals operation consist of teflon material that can or has the ability to resist any acid chemicals.

Please note this:

Transperent/garden hoses are not the best hose for corrosive acid chemical. It can stand it but not for a long duration.

Transperent /garden hoses are crimped with a hose male pipe fitting and weco union coupler. These crimping operation prepares the hose for guaranteed jobs. The transperency allows for an inspection of products being conveyed in the hose ,its helix wires provides electrical static conductivity and suction services. Transperent/Garden hoses has sizes ranging from 1/4 inches to 10 inches internal diametre

Hydraulic quick connect coupler.

Hydraulic quick connect is a coupling manufactured for a quick connection and disconnection during hydraulic system services.

The hydraulic quick connect above is a female Npt threaded coupler manufactured by hydraulic companies like Parker hannifin, Eaton and Vickers hydraulics ,Aeroquip etc.

Its one of the best form of hydraulic flow control. The hydraulic quick coupler minimises the risk of hydraulic fluid leakages and spillages.

Hydraulic quick couplings are formed in a different valving type. Ie, the different valve formation.


The hydraulic quick connector comprises of a double shut -off type,
single shut off type and
a straight through.

The double shut-off valve of has two valves at the two section of the connector. The male plug of The hydraulic quick coupler has a valve while the female socket of The hydraulic quick connector also has a valve.

Both the two section valves of these double hydraulic quick coupler closes automatically after services.

The hydraulic quick connector also is manufactured in a straight through model. This type of The hydraulic quick connect model has no valve at both section of the The hydraulic quick connect. The male and the female section are formed without any fluid control unit. Its main function is to allow a steady flow of hydraulic fluids with easy and quick locking/detaching .


Hydraulic quick connectors are manufactured in different forms according to their uses.

They includes:

The mold type of The hydraulic quick connector.

The non-spill hydraulic quick connector.

The general purpose hydraulic quick connector.


The high flow hydraulic quick connector.


Hydraulic quick connect and disconnect couplers are not used directly to the hydraulic hoses but rather they are used on the hydraulic crimper fittings or hydraulic reusable fittings before the hydraulic hoses.

Please find more detail about other hydraulic system in any of the links behind.

Hydraulic crimper fitting Bsp threading

Hydraulic crimper fitting Bsp threading is a hydraulic hose fitting used as a connection between two joint ends.

It is called a crimper fitting because it requires an electric machine or mechanical hand operating device to grip the hydraulic hose.

From the above diagrame is a hydraulic crimper fitting Bsp threading with a bend radius of 90 degrees.

The bend radius help for easy direction of the fitting to a particular point than forcing the hydraulic hose to an abnormal bend radius.

These hydraulic crimper bsp threading is manufactured by different crimper manufacturing companies like parker hydraulics company known as Parker hannifin, Vickers hydraulics, Eaton hydraulics, Aeroquip hydraulics and weatherheads.

hydraulic crimper fitting Bsp threading can be used with a hose coupled with hydraulic crimper fitting Jic threading. The only different is that the threads are of different formation.

JIC threads known as a joint industrial conference thread is different from Bsp threads(British system pipe thread) and both of them can never match each other.

hydraulic crimper fitting Bsp threading is produce in carbon steel,brass and stainless materials. And they are used according to the manufacturers specification.


Check out more about hydraulic fittings and hoses below.

Hydraulic reusable Npt threaded fittings.

Hydraulic reusable fitting Npt threading is a parker,Weatherhead or Aeroquip manufactured hydraulic fitting with an Npt threading.

Some of the fittings are formed in different ways. It could be made of stainless steel,brass and steel reusable hydraulic fittings material depending on where it could be used.

Hydraulic stainless reusable fitting jic is used on hydraulic fluid or chemicals that avoids steel or brass. They are more stronger and requires no rust.

Also hydraulic reusable brass fitting jic is used where there is salt water. In a salt water region is iether you use a stainless formed or brass formed than to used carbon steel formed.

Hydraulic reusable fitting Npt has a straight,45 degree and 90 degree bend. This depends on where the fitting is used. Though hydraulic hoses are flexible but some fittings helps in the flexibility.

There are areas where where you may want to use a 45 degree or 90 degree hydraulic fittings than using a straight fittings.

You may want to see more about hydraulic hoses and fittings below...

Hydraulic crimper and reusable hydraulic fittings .

hydraulic fittings are fittings used on hydraulic hoses and pipes.

With the above diagramme, the hydraulic fitting is a male NPT thread reusable fitting.

Hydraulic fittings are grouped into crimp fittings and reusable fittings.

The crimp fittings are used under a hydraulic crimper machines. While the reusable fittings are used with a hand operating or hand mechanical operating device.

Hydraulic crimper fittings and reusable fittings can be manufactured in different materials which includes:

stainless crimper and reusable fittings,
brass crimper and reusable fittings and carbon steel crimper and reusable fittings.

Hydraulic crimper and hydraulic reusable fittings has different types of threading which includes:

crimper and reusable fittings Npt threads,

crimper and reusable fittings Bsp threads,

crimper and reusable fittings metric threads and crimper and reusable fittings o-ring boss threads.

For Supports, advert placement and enquires,
please e mail at:
obyzill@yahoo.com

weco union fig 100

Weco union fig 100 is a wing and lug coupler used for both suction and discharging of cements,Petroleum and other substances.

Weco union fig 100 has different sizes ranging from 1" to 10 ". They have a pressure range of 1000 psi.

Weco union fig 100 are know by its colour, the lug bear the black colour while the pipe end thread bears a yellow colour.

weco union fig 100 ,fig weco union fig 200 and fig 1502 has almost the same character but are differed in shape and size because the pressures are different.

Weco union

Weco union is a wing type of connection that requires the running of its thread together against another.p

Its one of the best form of connecting two hoses and pipes together.

Weco union has different types and model.

For example: the weco hammer union fig 100 is identified with a black steel iron with a normal thickness. Its pipe ends are yellowish in colour.

Weco union fig 200 is again known by the colour, its more heavier than weco union fig 100.

The weco union fig 602 is a heavy duty weco union that stands up to a pressure of 6,000 psi. They are mostly used in the discharge of hydraulic products from hydraulic hoses.

Weco union fig 1502 is a very high pressure rating hammer union.they have the same wing with other weco union but the wing is very much different from others because of size.

Other hose coupling or pipe fitting that are globally recognised like weco union includes:
A camlock fittings or coupler, John morise fitting or coupler,and some other nipple clamps.

Check out more about weco hammer union suppliers and fittings.

Eaton hydraulic hoses LifeSense

Before the invention of Eaton hydraulic hoses LifeSense, many Companies operating both onshore and offshore had experience difficulties on the failure of hydraulic hoses and other non hydraulic, oil and gas hoses.



The difficulties that are encounterd are based on the hoses failure during services.

Such failure includes:


hydraulic/Hose Breakage: This is caused when the operating hoses has reached its work end rate. A period when the particular hose is regarded as an expired hose.


Hydraulic/Hose Bursting:
The rate at which hydraulic hoses bursts seems very high because the check is not available.
A particular hose can serve as long as its still serving until there is a breakage before the owner will decide whether to do away with it or to repair the hose, why because the lifespam of such hoses are not checked .


With the use of this Eaton hydraulic hoses LifeSense I think the tension of any hose failure will be reduced because there is a trusted and updated check on the hose .


How do you feel for the invention of this new Eaton hydraulic hoses LifeSense that are also used on other hydraulic hose and fittings makers.

Why I prefer using a metric thread, NPT threads,and JIC thread ?

All my hydraulics hydraulic crimper fittings are made up of an NPT, JIC and Metric threading.


Whenever I start to fit in or crimp any of my Parker hydraulic hoses , Eaton and Vickers hydraulics , I must make sure that each of my hydraulic hoses are crimped normal with the fittings.


Sometimes, I make use of a manual type or Parker reusable fittings hydraulic fittings instead an electric crimper.

Some NPT threadings are not the same.
Any NPT threading are grouped into rough threads and smooth threads.

When I want to crimp my Eaton hydraulic hose. I prefer using the NPT thread to the weco union or camlock fitting connection. But when I want to use the NPT smooth threading, I will make use of my hydraulic pressure pumps.


But for other hydraulic jobs. I may use a metric threading or JIC threadings.

My weco union connection is leaking hydraulics. Please, somebody should tell me what to do.

My weco union connection is leaking out hydraulics.
I have tried every possible means to see that my Parker and Eaton hydraulic hoses is discharging with the normal pressure but each time I start my hydraulic pressure pumps the weco union will be leaking.

I have inspected the hammer part of the fmc weco union but I see everything as normal.

The hydraulic pressure that I am working with is a Parker hydraulic hose pressure of 150 psi. And each time I start the hydraulic pump, the weco union fig 100 will be leaking out hydraulics.

Please , what do you think is the cause of the weco union leakage .
Could it be from the threading connections?

How I start using Weco Hammer Union for my jobs

I never knew that there is an easier way to connect a hydraulic hoses to another or hose to pipe until my friend linked me to a dealer that manufactures Weco hammer union . They showed me how its to be coupled and its different model.

I also learned that you can also use it on rubber pressure hoses manufactured by Parker hannifin , Eaton and Vickers hose manufactures.



To my greatest surprise I discovered that Weco hammer union is a hose fitting made up up a wing, which is called the hammer , the threading and the model.

I think using weco union to all my pipe connection will go a long way for me for a better service delivery.

Have you used Weco hammer union before ,tell me how you feel for it and how do you see its services.

Please mention few companies that you know that manufactures hydraulics hoses and fittings ?

Some people like you will say that parker hannifin is the number one. But there are other manufacturers who are not well known like Parker hannifin hydraulics .
You can mention them below to let your friends know about them.

You can also tell us more of what you know about hydraulic fittings .

Does parker hanninin manufactures produces hydraulic hoses and fittings ?

Does Parker hannifin manufactures produces hydraulic hoses and fittings ?

The answer to the above question is that the Parker hannifin hydraulic hose and fittings manufactures produces hydraulic hoses and its fittings with her best effort and efficiency. These Parker hannifin hydraulics manufactures are not only recognized in the United States of America but among the whole continent. So I strongly believe that Parker hannifin hydraulics manufacturer together with Eaton and Vickers hydraulics, Aeroquip hydraulics,Power hydraulics and Weatherhead produces hydraulic hoses and its fittings.

Parker hydraulic hoses definition

Define Parker hydraulic hose and its fittings and how can the hydraulics hoses and its fittings be used for ?

Parker hannifin hydraulic hoses manufacturers

Parker hannifin hydraulics manufactures hydraulic hoses for a particular or specific services



Parker hannifin hydraulic hoses are produced to carry out onshore and offshore transfer of petroleum products,hydraulic and gas product.

The use of the Parker hannifin hydraulics hose has helped most oil field Engineers in choosing the right hose for a better services.


The only thing I like about Parker hannifin hydraulics manufactures is that they specify very well with a perfect description of the hose on its rubber body.
For example,
Parker hydraulic hoses that are used to convey hydraulics under the working pressure of 5000 psi will be specified clearly on the hose rubber body.


Parker hannifin hydraulics have tried so well and they need to be praised for their achievement over the years.

Check out more about hydraulic fittings below.

Parker hannifin hydraulic JIC threading

Parker hannifin hydraulic JIC threading is a process of fitting a particular (JIC) joint industrial conference thread to each other.

Parker hannifin hydraulic JIC threading is a world recognized system of pipe reconnection.

These Parker hannifin hydraulic JIC threading are not found only on Parker products like Parker hydraulic hoses but also on Rexroth hydraulics, Power hydraulics ,haldex hydraulics, Eaton and Vickers hydraulics,Gates hydraulics, Eaton hydraulics and EPHA hydraulics hoses.

Never you connect a Parker hydraulic hannifin fittings JIC threading to a Parker hannifin hydraulic fittings NPT threading because the two are not the same threading and will not match .


And also, do not use a Parker hannifin hydraulic male JIC threading to a Parker hannifin hydraulic female BSP threading. The two connections are not the same therefore it will leak.

All Parker hannifin hydraulic male JIC threading must be used with a Parker hannifin hydraulic female JIC threading.

And all Parker hannifin hydraulic male BSP threading must be used with a Parker hannifin hydraulic female BSP threading.





Check out more of hydraulic hoses and fittings below.

Parker hydraulic hoses adapters

Parker hydraulics hose adapters are manufactured to form a support to the existing connections.

Parker hydraulics hose adapters are grouped in sizes, thread , how elbow whether 90deg. Or 45degree bend.

Parker hydraulics hose adapters carries JIC threading, BSP threading, NPT threading , ORB thread
.

Parker hydraulics hose adapters can have a JIC threading on one end and another JIC threading the other end. For example:

Parker hydraulics hose adapters 2" male NPT to 2" female NPT swivel.

Parker hydraulics hose adapters 1 " male JIC to 1" female JIC swivel.

Parker hydraulic hose Adapters also can have different thread connection at both ends like the Npt and Bsp threadings. For example:

Parker hydraulics hose adapters 2" male NPT to 2" female BSP swivel.

Parker hydraulics hose adapters 1 " male pipe Npt to 1" female JIC swivel.


Check out more about hydraulic hoses and fittings below.

Parker hydraulic hose

Parker is the manufacture ,the distributor and marketer of hydraulic pressurehose,hydraulic systems, hydraulic valves, hydraulic crimper fittings , pneumatics, pumps and other hydraulic hydrauli machine.

parker hydraulics also manufactures hose crimp fittings, hydraulic pressure pumps and hose adapters.

Parker hydraulic hoses fittings varies in sizes.
The thread of the fitting can be an NPT thread, BSP thread or JIC thread.

Parker hydraulics hose fittings JIC thread does not match the Parker hydraulics hose crimper fittings NPT thread or BSP thread.

Parker hydraulics hose fittings comes in a crimp form or reusable form. The crimp fittings are done with a machine when a hydraulic pressure is applied from hydraulic hose to the machine. While the hydraulic reusable fittings is only done with a machine with a reusable spanner end. Or an ordinary heavy duty spanner.

Parker hydraulics hose fittings JIC thread includes:

1/4"Parker hydraulics hose fittings JIC,
3/8 "Parker hydraulics hose fittings JIC,
1/2"Parker hydraulics hose fittings JIC,
3/4"Parker hydraulics hose fittings JIC,
1"Parker hydraulics hose fittings JIC,

11/4"Parker hydraulics hose fittings JIC,
11/2"Parker hydraulics hose fittings JIC,
2"Parker hydraulics hose fittings JIC.

The Parker hydraulics NPT threading includes:

1/4"Parker hydraulics hose fittings NPT,
3/8 "Parker hydraulics hose fittings NPT,
1/2"Parker hydraulics hose fittings NPT,
3/4"Parker hydraulics hose fittings NPT,
1"Parker hydraulic fittings NPT,

11/4"Parker hydraulics hose fittings NPT,
11/2"Parker hydraulics hose fittings NPT,
2"Parker hydraulic hoses fittings NPT.

Power hydraulic hoses

One of the world notable hydraulic company,

Power hydraulics is the manufacturer and the distributor of hydraulics systems, hydraulics tools,Power Power hydraulic hoses and other engineering services.

Power hydraulics as a hydraulics company is located at lake Charles, Louisiana, USA.

Power hydraulics offers the same services that Parker hydraulics ,Aeroquip , Eaton and Vickers hydraulics,Sun hydraulics,Rexroth hydraulics and others.

Power hydraulics also specializes in the manufacturing and fabrication and formation of metals and aluminum products. Most of the Power hydraulics products are designed to be used for the onshore and offshore services.

Check out more details on hydraulic hose and crimper fitting.

Hydraulic hose and hoses

Hydraulic hoses are produced by some industries like Parker hydraulics , Power hydraulics ,Eaton and Vickers hydraulics,Weatherhead hydraulics, Aeroquip hose and others. Hydraulic products like the Parker hydraulic hose fittings The above industries are durable.
The professional ideal of producing the hydraulic fittings and hoses helps to keep the hydraulic systems operating at a higher standard.

The hydraulic solution tools of the above existing industries helps the users to cut cost and an unnecessary expenditure.

Some of the above listed companies offers repair and maintainance options to their clients.

These hydraulic hoses and fittings producing industries also delivers good hydraulic hose crimper fittings and can also help its customers in pressure testing when required.