Parker hannifin hydraulic steel fittings


Parker hannifin hydraulics manufactures hydraulic reusable steel fitting. The Parker hannifin hydraulics reusable steel fittings are designed to fit in hydraulic hoses with wire reinforcement such as 100RIAT(contains a single braided wire).



The hydraulic hose for reusable steel fittings are made up of a clothbody medium pressure hoses.

Parker hannifin hydraulics reusable steel fittings ranges from 3/16 " to 4 " just as in



Weatherhead reusable and crimp fittings


Before making use of any Parker hannifin hydraulics reusable steel fittings, you must ensure the outside diameter of the hose and also take the measurement of the reusable pipe end that will enter the hose. Parker hannifin reusable steel fittings can be used in place of crimper fittings. But you must ensure the pressure of the hose to determine the type of Parker hannifin hydraulics crimp fitting sleeves. To know when to use a four wire sleeve or two wire sleeve.



parker hydraulics reusable steel fittings are known from their dash sizes. For example: the dash 4( -4)=1/4" the dash 8(-8)=3/8".


Check out more about hydraulic hoses and fittings below:

2 comments:

  1. Hi, Thanks for sharing nice information with us.

    hydraulic fittings Toowoomba

    ReplyDelete
  2. Hello, i feel lucky to read such type of blog in which a person provides a necessary knowledge about hydraulic fittings Toowoomba.I would like to thanks to share it with us and want to continue with your blogs.

    ReplyDelete

For Advertisement, Support and information please email us at : obyzill33@gmail.com.

Please feel free to say your views . Your comment can help us to improve better.